Westfield parts and upgrades

Omex throttle body kit complete with ECU to suit Zetec 2.0 l Blacktop

This kit is made from the following parts:
Mappable Engine Management System (ECU)
Basic Race Spec Wiring Loom
Air Temperature Sensor
Lambda Sensor
Throttle Body Set
Air Filter
Air Filter Backing Plate
Air Horns Spacers
Fuel Rail Adapters
Coolant Temperature Sensor
Fuel Pressure Regulator

Fully Programmed and Assembled Ready to Fit

This will require the use of the original injectors from the ford injection system.

Throttle Bodies Will Require Balancing

Lead times of 6 to 8 weeks as the kits are hand assembled and built to order

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

Zetec black top throttle body kit

When using the standard ford plenum chamber with Westfield Omex 600 ecu, convert to throttle bodies with this kit, including re flash cd for the Omex 600.

Takes the power of the car from the standard 150bhp to just over 170bhp, with headroom for more tuning later on such as cams and cylinder head work

Kit Includes...

Throttle Body Set
Air Filter
Fuel Pressure Regulator

Plus every thing needed to fit this kit to your car with no hidden costs or extras needed, you will need to retain the original injectors from the ford plenum to use in the throttle body kit.

Once fitted, the car will run and can be used with no problems, but to get the full benefit of the system, Westfield recommend a rolling road session to fully optimise the ecu set up and the throttle bodies will require balancing.

Lead times of 6 to 8 weeks as the kits are hand assembled and built to order

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

 

2.0 L Zetec Omex ignition kit for ford Zetec 2.0 L blacktop

This kit is made from the following parts:

Mappable Engine Management System (ECU)
Basic Race Spec Loom
Air Temperature Sensor
Narrow Band Heated Lambda Sensor

Lead times of 6 to 8 weeks as the kits are hand assembled and built to order

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk 

WESTFIELD PART NO: 1711091

DESCRIPTION:

Zetec Exhaust Manifold
Primary Manifold for Zetec Blacktop Engine
Outlet (silencer end) is 2 inches in diameter
Manifold will also suit the silver top zetec engine

WESTFIELD PART NO: 1730022

DESCRIPTION:

Westfield racing wet sump kit to suit zetec black top 2.0 litre engines.

Please note: Image is for display purposes only, Actual kit will vary!

You will also require the following parts for installation:

1 x 2951010 - Starter Motor

1 x 1734008 - Sump Gasket £22.80

1 x 1754015 - Oil Filter

WESTFIELD PART NO: 2640045

DESCRIPTION:

Zetec Cooling Hose Kit
Will Not suit ducted nose cone setups.
Please note that photo is for illustration purpose.

WESTFIELD PART NO: 2940064

DESCRIPTION:

Zetec Blacktop Alternator Fitting Kit
Kit components:1 x 4942056 - Alternator plate1 x 2945156 - Alternator belt 2L Blacktop1x x 2942126B - Alternator bracket Zetec R1 x 1416143 - Spacer idler pulley Zetec R1 x 1417132 - Spacer idler pulley short1 x 1470189B - Mounting plate idler pulley1 x 2943038 - Pulley1 x 2943011 - Idler pulley1 x 6811010 - M10 Lock washer single1 x 6823UTO - M10 washer1 x 8155450 - M10x45 socket cap bolt1 x 8111800 - M10x 80 hex head bolt6 x 6802801 - M8 plain washer1 x 6811008 - M8 washer lock singe coil4 x 71230008 - M8 x 1.25 nyloc nut1 x 8111308 - M8 x 30 hex head 1 x 8111358 - M8x35 hex head bolt3 x 8111408 - M8x40 hex head bolt1 x 8165840 - M8x40 special cap head

WESTFIELD PART NO: 2941059

DESCRIPTION:

Zetec Alternator
Used on factory supplied zetec engines.

WESTFIELD PART NO: 5220038

DESCRIPTION:

Zetec Steering Column Kit
This Kit will only suit black top zetec engines with standard injection or throttle bodies. If you have throttle bodies installed you can use 5221000 lower single piece column. 

WESTFIELD PART NO: 3240010

DESCRIPTION:

2.0 Zetec Black Top Clutch Kit

WESTFIELD PART NO: 2951010

DESCRIPTION:

Zetec Starter Motor To Suit Raceline Sump
Lightweight, high torque starter motor for Zetec engines with raceline sump, Zetec flywheel and type 9 gearbox.
Specification:Kilowatts     1.40 kWTeeth           10Boss Size     89mmVoltage        12 VWeight:       2.90 kg  
Current spec starter motor for black top Zetec with Raceline sump.

WESTFIELD PART NO: 2642135B

DESCRIPTION:

Zetec Header Rail Water Pipe

WESTFIELD PART NO: 1720094

DESCRIPTION:

Zetec Engine Mounting Set

WESTFIELD PART NO: 5221000

DESCRIPTION:

Lower steering column including high tensile bolts
End to end measurement is 815mm.
This steering column can be used on Black Top Zetec's that have throttle bodies fitted to replace the 3 piece column kit.

WESTFIELD PART NO: 2943038

DESCRIPTION:

Idler Pulley For Zetec and Duratec

WESTFIELD PART NO: 4032043B

DESCRIPTION:

Zetec Air Intake Box

WESTFIELD PART NO: 2921127

DESCRIPTION:

Zetec Engine Loom Black Top
Please note this is an ancillary loom only NOT engine management loom

WESTFIELD PART NO: 2622001

DESCRIPTION:

Lightweight radiator for use with ducted nose cone and standard cone.
Fits all Zetec engine Westfield's.

Length: 47cm
Width: 33cm
height: 5cm

WESTFIELD PART NO: 4032016

DESCRIPTION:

Foam air filter, suitable for OMEX throttle body kits and Duratec Webcon throttle body kits. Filter also used on bike engine cars (BEC).

Does not include backing plate.

Please note that the signage on the filter foam may differ if there are any supply issues.

WESTFIELD PART NO: 2943011

DESCRIPTION:

Idler Tension Pulley for Zetec and Duratec