Westfield parts and upgrades

Welcome to the new Westfield parts and upgrades website. Our aim is to make it a comprehensive and easy to use resource when planning annual servicing, repairs and upgrades for your Westfield Sport and XI.

There are over 15,000 parts that have historically been used in the cars. To get the shop open we have concentrated on fast moving parts that are still in production. As we build the business back up we will be adding more and more components. Please let us know by email if there is something you need and is not listed:parts@westfield-sportscars.co.uk.

SDV Starter Module
WESTFIELD PART NUMBER: SEIW CHY MAZDA-EPX

CONTENT

Space frame chassis
Top and bottom front wishbones
Engine mounting brackets
Brake lines (Aeroquip and T-Piece)
Aluminium panels set – floor pan, seat back, tunnel, scuttle
Nut and bolt pack
Riv-Nut pack
Suspension bushes
Chassis plate
Wing brackets
Hand brake cable
Bottom rear wishbones
Construction manual
£ 7,395.00 7395.0 GBP
Full FIA Spec Roll Cage Wide Body

WESTFIELD PART NO: 4633025

DESCRIPTION:

Full FIA specification roll cage. To suit wide bodied Westfields.
Includes all fittings, nuts, bolts and washers. 2-3 weeks lead time.

FW roll bar covers are not included and will need to be purchased separately. The part number for these is 1290020

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

Material used:PTG700/T45 vs CDS Material Specifications:T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS. 
£ 1,439.89 1439.89 GBP
Full FIA Spec Roll Cage std/narrow body Independant

WESTFIELD PART NO: 4633039

DESCRIPTION:

Full FIA specification roll cage. To suit standard/narrow bodied Westfields.

Please be aware welding is required for installation of the side bars. Side bars may also require cutting down to suit your chassis. Early narrow chassis varied in design, bars are provided longer to allow for variables.
Includes all fittings, nuts, bolts and washers.

PTG700/T45 vs CDS Material Specifications:
T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.
The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS.
£ 1,099.00 1099.0 GBP
Full FIA Spec Roll Cage std/narrow body IRS

WESTFIELD PART NO: 4633038

DESCRIPTION:

Full FIA specification roll cage. To suit standard/narrow bodied Westfields.

Please be aware welding is required for installation of the side bars. Side bars may also require cutting down to suit your chassis. Early narrow chassis varied in design, bars are provided longer to allow for variables.
Includes all fittings, nuts, bolts and washers.

PTG700/T45 vs CDS Material Specifications:
T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.
The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS.
£ 1,099.00 1099.0 GBP
Sport Turbo Seat

WESTFIELD PART NO: 5811302

DESCRIPTION:

Sport Turbo Seat
Comes complete with runners fitted ready to bolt in to your car.
Will only fit wide body cars and some drilling may be required into floor pan.
Please leave a note on your order for the colour piping and logo you require.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

SPECIAL INSTRUCTIONS:

Please note all trim orders are made to order due to the various colour and style options available. The lead time can vary from time to time so please bare this in mind when ordering. We have various trim colours available but please give us a ring and we can discuss options for your needs if not black trim will be supplied.
PLEASE NOTE THAT SEATS ARE COLLECTION ONLY ITEMS.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 965.64 965.64 GBP
3rd Gen Wide Track Front Wishbone, Hose and Bush Kit

WESTFIELD PART NO: 3702095

DESCRIPTION:

Wide track front wishbone 3rd generation kit, also includes front brake hoses and metalastic bushes

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.
8 suspension bushes (4313001)
2 longer brake hoses. (sei rear brake hoses required 2311007)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**
£ 799.99 799.99 GBP
3rd Gen Wide Track Front Wishbone Kit

WESTFIELD PART NO: 3702093

DESCRIPTION:

Wide track front wishbone kit 3rd generation.

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.

You will also require

8 suspension bushes (4313001)

2 longer brake hoses. (sei rear brake hoses required 2311007)2 Wide track front springs (3702093)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**
£ 695.00 695.0 GBP
MSA Spec Half Cage STD/Narrow Body

WESTFIELD PART NO: 4633040

DESCRIPTION:

Half cage roll bar for standard/narrow body cars, with double central cross brace and 2 rear stays.

Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.
Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.
PLEASE NOTE THAT CAGE IS COLLECTION ONLY

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 445.00 445.0 GBP
MSA Spec Half Cage Wide Body

WESTFIELD PART NO: 4633037

DESCRIPTION:

Half cage roll bar for widebody cars, with double central cross brace and 2 rear stays.
Suitable for classic and FW body styles.
Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.

Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.

Height, 485mm from roll bar mounting plates on your chassis.

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 445.00 445.0 GBP
Zetec Blacktop Alternator Fitting Kit

WESTFIELD PART NO: 2940064

DESCRIPTION:

Zetec Blacktop Alternator Fitting Kit
Kit components:1 x 4942056 - Alternator plate1 x 2945156 - Alternator belt 2L Blacktop1x x 2942126B - Alternator bracket Zetec R1 x 1416143 - Spacer idler pulley Zetec R1 x 1417132 - Spacer idler pulley short1 x 1470189B - Mounting plate idler pulley1 x 2943038 - Pulley1 x 2943011 - Idler pulley1 x 6811010 - M10 Lock washer single1 x 6823UTO - M10 washer1 x 8155450 - M10x45 socket cap bolt1 x 8111800 - M10x 80 hex head bolt6 x 6802801 - M8 plain washer1 x 6811008 - M8 washer lock singe coil4 x 71230008 - M8 x 1.25 nyloc nut1 x 8111308 - M8 x 30 hex head 1 x 8111358 - M8x35 hex head bolt3 x 8111408 - M8x40 hex head bolt1 x 8165840 - M8x40 special cap head

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 355.00 355.0 GBP
Wiper Motor Kit

WESTFIELD PART NO: 4650001

DESCRIPTION:

Wiper motor kit
Including wheel boxes, tube, pad and 2x bolts, washers, nuts

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 229.00 229.0 GBP
Harness 4 Point 3" Blue Right Hand (LH Strap)

WESTFIELD PART NO: 4611135

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Harness 4 Point 3" Blue Left Hand (RH Strap)

WESTFIELD PART NO: 4611136

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Harness 4 Point 3" Red Left Hand (RH Strap)

WESTFIELD PART NO: 4611134

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Harness 4 Point 3" Red Right Hand (LH Strap)

WESTFIELD PART NO: 4611133

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Harness 4 Point 3" Black Left Hand (RH Strap)

WESTFIELD PART NO: 4611132

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Harness 4 Point 3" Black Right Hand (LH Strap)

WESTFIELD PART NO: 4611131

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***
£ 199.00 199.0 GBP
Quick Release Boss Self Aligning

WESTFIELD PART NO: 5231015

DESCRIPTION:

Formula Self-Aligning Quick Release Boss - Weld On
Go-Race Formula (3 X 50.8 mm PCD) Quick Release Steering Boss with Weld-On Shaft

The self-aligning mechanism makes it easier and faster to attach your steering wheel. Simply attach the boss and turn the wheel until the locking mechanism locates
Precision CNC machined using high quality materials
Zero play design eliminates any backlash
Lightweight Design
Weld-on Shaft adaptable to any steering column*

3 x 50.8 mm PCD bolt flange suitable for most single seater / formula wheels
Choice of colour (gold or black)
Conforms with FIA regulations
Manufactured in the UK
PRODUCT SPECIFICATIONS
Wheel Fitting 3 X 50.8 mm PCD
Column Fitting Weld On
Boss Material Aluminium
Boss Finish Hard Anodised
Boss Weight 135 g
Shaft Material Mild Steel
Shaft Finish Nickel (removed on welded area)
Shaft Weight 100 g

*Welding to be carried out by experienced welder/fitter. Requires drilling/machining to fit column.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

£ 179.00 179.0 GBP
Side Protection Bar Kit

WESTFIELD PART NO: 4633031

DESCRIPTION:

Side Protection Bar Kit
Bars will fit wide body chassis and can be bolt on fitment or can be welded in.
Image shows a welded in version were the bolt in tabs have been cut off.
Comes with fixings.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 169.00 169.0 GBP
Westfield Sport Wind Deflector Kit

WESTFIELD PART NO: 5531010

DESCRIPTION:

Windscreen Wind Deflector kit
Complete kit, including hinges and all nuts bolts washers ready for assembly

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk
£ 159.98 159.98 GBP