Westfield parts and upgrades

WESTFIELD PART NO: 6102004

DESCRIPTION:

Set of front and rear chassis stands including bolts
Black Powder Coated Finish
Used for people building cars in there garage up to a rolling chassis stage

WESTFIELD PART NO: 6102033

DESCRIPTION:

ZK Body IVA Cover Kit
Included in this is nut covers, rubber u section, bonnet covers, pillar hinge covers, harness buckle covers, track rod covers, brake fluid decal, switch identification decal, zk tank protection bar and zk rear light levelling brackets.

The kit is the majority of small finishing touches but you may also need a tethered fuel cap, clear side indicators that go on the front cycle wings and also dash warning lamps need to have identification symbol on depending on the age of your car/kit.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 6191002

DESCRIPTION:

Westfield Tool Bag

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: LIQ1129

DESCRIPTION:

Mildly blended mineral-based motor oil. Specially tailored to the requirements of classic cars and motorcycles with oil filter. Selected base oils and additives guarantee optimum lubrication and very good wear protection under all operating conditions.

Specially designed for classic cars and motorcycles with oil filter elements in which a mildly blended lubricant is required.

WESTFIELD PART NO: 7300705B

DESCRIPTION:

Replacement fastener kit for front and rear suspension, suitable for standard, wide track and 3rd gen wishbones.
Bolts: 7811107 x 20 / 7811127 x 2 / 7811167 x 2 / 7811117 x 2 / 7811157 x 2
Nuts & Washers: 7133007 x 28 / 6823TU7 x 68 / 6853AU7 x 8

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 5502000

DESCRIPTION:

Body fitting kit for ZK front and rear body
Kit includes: Bonnet fasteners, catch and clip, Bonnet pin and grommets, Bonnet insulator, Rivets and fixings.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: LIQ2326

DESCRIPTION:

Particularly suitable for Ford vehicles.
Low-friction motor oil based on synthetic technology. Reliably prevents the formation of deposits, has extremely high shear stability, reduces frictional losses in the engine and provides outstanding protection against wear. Especially suitable where there are long intervals between oil changes and heavy duty engine requirements.

Required for various vehicle types from 2011. Backwards compatible and can be used without hesitation in older Ford vehicles from 7/1998. Also suitable for vehicles from various other manufacturers. Tested for use with turbochargers and catalytic converters. Not suitable for VW with extended maintenance intervals (WIV)!

WESTFIELD PART NO: LIQ21146

DESCRIPTION:

Radiator antifreeze based on ethylene glycol. Combination of active agents with an OAT inhibitor package specially developed for modern aluminum high-performance engines. Does not contain amines, borates, nitrites, phosphates or silicates and provides outstanding protection against frost, rust and overheating. If mixed with water in the right ratio, ensures reliable vehicle performance all year round. For all cooling systems and engines, in particular aluminum high-performance engines in passenger cars (both with combustion engines as well as in hybrid vehicles and battery electric vehicles), commercial vehicles, motorcycles, buses, agricultural and construction machinery as well as stationary engines and equipment that require cooling system protection of this quality. Particularly suitable for engines of the latest generation.

WESTFIELD PART NO: 6102035

DESCRIPTION:

FW Body IVA Cover Kit
Included in this is nut covers, rubber u section, bonnet covers, pillar hinge covers, harness buckle covers, track rod covers, brake fluid decal and switch identification decal.

The kit is the majority of small finishing touches but you may also need a tethered fuel cap, clear side indicators that go on the front cycle wings and also dash warning lamps need to have identification symbol on depending on the age of your car/kit.

WESTFIELD PART NO: 1443105B

DESCRIPTION:

ZK IVA Fuel Tank Protection Bar

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 6191001

DESCRIPTION:

Scissor Car Jack

WESTFIELD PART NO: LIQ1407

DESCRIPTION:

Semi-synthetic hypoid gear oil with extremely high performance reserves. Excellent ageing stability. Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning. Minimizes wear. Outstanding viscosity temperature behavior. Enables long oil change intervals.

WESTFIELD PART NO: 6191030

DESCRIPTION:

Universal Hood Fitting Kit and Tool
Kit Includes tool and fasteners as per image

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: LIQ20845

DESCRIPTION:

Low-viscosity high-performance transmission fluid with excellent high pressure and wear protection properties. Multi-purpose. Reduces friction, lowers fuel consumption and emissions and ensures smooth shifting operations. The outstanding thermal and oxidative stability guarantees a clean transmission and a long oil service life. Developed for use in transaxles, manual transmissions and transfer cases. Recommended particularly for BMW, Ford, GM/Opel, Honda, Nissan, Toyota/Peugeot/Citroën (PSA), Volvo and vehicles from other manufacturers.

WESTFIELD PART NO: LIQ1410

DESCRIPTION:

Premium low-friction motor oil based on synthetic technology. Ensures optimum lubrication, outstanding lubricating film stability and minimum wear and deposits even under extreme loads. Ideally suited for engines with start/stop system. Guarantees maximum performance with low fuel consumption.

For gasoline and diesel vehicles. Specially developed for the requirements of BMW, Mercedes-Benz, Opel and other manufacturers.

WESTFIELD PART NO: LIQ3802

DESCRIPTION:

Prevents screw connections from working loose. Resists loosening due to vibration. With a wide operating temperature range of -60 °C to +150 °C. Fast and reliable hardening. Can be used on oiled surfaces. Seals threads, prevents leaks and has good chemical resistance. For all common nuts and screw sizes of all grades.

WESTFIELD PART NO: LIQ3679

DESCRIPTION:

Synthetic brake fluid for extreme operating conditions. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. The brake fluid has an excellent wet and dry boiling point, thus ensuring safe braking even after the absorption of some moisture over an extended period of use. Special additives prevent the premature build-up of vapor bubbles. Exceptionally well suited for the use of all disk and drum brake systems, as well as clutch systems for which a synthetic brake fluid of this specification is prescribed. The brake fluid is also suitable for use in ABS brake systems.

WESTFIELD PART NO: LIQ21157

DESCRIPTION:

Synthetic brake fluid based on glycol ethers, alkyl polyglycols and glycol ether esters. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. The brake fluid has a high wet and dry boiling point, thus ensuring safe braking even after the absorption of some moisture over an extended period of use. Special moisture scavengers help to prevent against the formation of steam bubbles.

Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of this specification is prescribed. The brake fluid is also suitable for use in ABS brake systems.

WESTFIELD PART NO: LIQ3406

DESCRIPTION:

Squeeze-stable, water resistant, oxidation and corrosion resistant high performance lithium complex soap grease. Can be used everywhere. Guarantees very good wear protection and high-pressure absorbance capacity. Designation acc DIN 51502 KP2N-30. Service temperature: –30 °C to +140 °C. Intermittent up to +180 °C. For lubrication of high-load bearing plain and roller bearings such as wheel bearings or greased industrial transmissions.

WESTFIELD PART NO: LIQ3010

DESCRIPTION:

High-performance tungsten disulfide paste for heavy-duty applications. Adheres even to apparently smooth surfaces. Applied to bearings and slide guides, prevents running-in damage and seizing marks when assembling components with tight pairings. With a synergistically active solid lubricant system with a zinc sulfide, graphite, fluorides and tungsten disulfide base. Operating temperature range: –35 °C to +450 °C
For assembly, repair and maintenance in all technical areas. For basic and lifetime lubrication of joints and small components.

Application...

Apply to cleaned sliding surfaces using a paint brush, brush or lint-free cloth. Do not rub in. Can be applied in excess.