Westfield parts and upgrades

WESTFIELD PART NO: 3702096

DESCRIPTION:

Wide track front wishbone 3rd generation kit, with wide track front and rear shocks and springs also includes front and rear brake hoses and powerflex bush set.

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack


NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 2340076

DESCRIPTION:

Westfield Racing 4 pot caliper upgrade kit

The kit includes, Westfield Racing pot callipers, Grooved and vented 283mm front discs, Ferodo DS2500 pads (upgraded pad spec), All fittings to mount  the parts to your car. 

Will fit Westfield aluminium uprights and hubs and ford Cortina front uprights and Cortina hubs.

THIS BRAKE KIT WILL FIT INSIDE WESTFIELD STANDARD FITMENT 13" WHEELS
Flexible hoses not included in kit. If you require hoses they are available separately

WESTFIELD PART NO: 2340075

DESCRIPTION:

Westfield Racing 4 pot caliper upgrade kit

The kit includes, Westfield Racing pot callipers, Grooved and vented 283mm front discs, Ferodo DS2500 pads (upgraded pad spec), All fittings to mount  the parts to your car. 

Will fit Westfield aluminium uprights and hubs and ford Cortina front uprights and Cortina hubs.

THIS BRAKE KIT WILL FIT INSIDE WESTFIELD STANDARD FITMENT 13" WHEELS
Flexible hoses not included in kit. If you require hoses they are available separately

WESTFIELD PART NO: 3742086

DESCRIPTION:

Nitron competition rear or wide track front shock absorbers.
Priced and sold in pairs.
Please note that if you are running wide track or third generation wishbones you will need 4 of these. When ordering, please advise what model you have in the notes section. Below are a list of some model examples. 
Westfield Megabusa, Westfield Sport 250, Westfield S2000, Westfield Special Edition, Westfield Mazda, Westfield ST2 or Westfield ST3

WESTFIELD PART NO: 3702095

DESCRIPTION:

Wide track front wishbone 3rd generation kit, also includes front brake hoses and metalastic bushes

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.
8 suspension bushes (4313001)
2 longer brake hoses. (sei rear brake hoses required 2311007)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 2125003

DESCRIPTION:

Set of 4 Team Dynamics Pro Race LT Wheel 7x15/8x15" ET25 4x108
This Set includes 2 x 7x15" Wheels and 2 x 8x15" Wheels
TUV approved and tested10 Spoke
Gunmetal grey in Colour. 10 Spoke, TUV approved and tested, Flow Formed Technology These are not a direct replacement for the older pro race 1.2 wheel

WESTFIELD PART NO: 2125002

DESCRIPTION:

Set of 4 Team Dynamics Pro Race LT Wheel 7x15/8x15" ET25 4x108
This Set includes 2 x 7x15" Wheels and 2 x 8x15" Wheels
Wheel is flow formed technology and weighs only 6.1KG
TUV approved and tested10 Spoke
Gloss Black in Colour. 10 Spoke, TUV approved and tested, Flow Formed Technology These are not a direct replacement for the older pro race 1.2 wheel

WESTFIELD PART NO: 3702093

DESCRIPTION:

Wide track front wishbone kit 3rd generation.

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.

You will also require

8 suspension bushes (4313001)

2 longer brake hoses. (sei rear brake hoses required 2311007)2 Wide track front springs (3702093)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 2125001

DESCRIPTION:

Set of 4 Team Dynamics Pro Race LT Wheel 7x15 ET25 4x108
Wheel is flow formed technology and weighs only 6.1KG
TUV approved and tested10 Spoke
Gunmetal grey in Colour. 10 Spoke, TUV approved and tested, Flow Formed Technology These are not a direct replacement for the older pro race 1.2 wheel

WESTFIELD PART NO: 2125000

DESCRIPTION:

Set of 4 Team Dynamics Pro Race LT Wheel 7x15 ET25 4x108
Wheel is flow formed technology and weighs only 6.1KG
TUV approved and tested10 Spoke
Gloss Black in Colour. 10 Spoke, TUV approved and tested, Flow Formed Technology These are not a direct replacement for the older pro race 1.2 wheel

WESTFIELD PART NO: 3700143

DESCRIPTION:

Aluminium front uprights (pair) without calipers.

These uprights are for 3rd generation suspension setups.

Will not suit standard or early wide track suspension

Complete built up as pictured.

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3700142

DESCRIPTION:

Aluminium front uprights (pair) without calipers.

These uprights are for standard or early wide track suspension setups.

Will not suit 3rd generation.

Complete built up as pictured.

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3213088

DESCRIPTION:

Left Hand Driveshaft Assembly 
To fit Westfields with b type sierra diffs or mazda diffs with output adapter plates fitted

WESTFIELD PART NO: 3213087

DESCRIPTION:

Right Hand Driveshaft Assembly 
To fit Westfields with b type sierra diffs or mazda diffs with output adapter plates fitted

WESTFIELD PART NO: 5230010

DESCRIPTION:

Momo Team Steering Wheel Kit - ***Non IVA compliant***
280 mm steering wheel with leather trim, excellent fitment on all Westfields, kit includes spacer to increase switch clearance.
Will fit all Westfield's which have a Westfield supplied top steering column.
Kit Includes Steering wheel - 5232202 Boss adaptor - 5231002 Spacer - 5232203

WESTFIELD PART NO: 3742078

DESCRIPTION:

Nitron competition front shock absorber. - Priced and sold individually.
Please note that these shocks will only suit standard track suspension
When ordering, please advise what model you have in the notes section.
Below are a list of some model examples. Westfield Megabusa, Westfield Sport 250, Westfield S2000, Westfield Special Edition, Westfield Mazda, Westfield ST2 or Westfield ST3

WESTFIELD PART NO: 2314188

DESCRIPTION:

Brake Master Cylinder - 20mm Large Bore - M8 Threaded Rod

Suitable for all current Westfield vehicles, Special Edition FW or ZK, Mega S2000 and Mazda applications. Not suitable for LHD XI, Sport 250 or ST models.

If you have an early Westfield model and it has floor mounted pedal this master cylinder is suitable.

*** We DO NOT have a replacement seal kit for this master cylinder***

***Will not fit as a replacement for the Cortina master cylinder - mounting holes are in a different position. Cortina had horizontal mounting holes, our master cylinder has vertical mounting holes***

WESTFIELD PART NO: 2342123

DESCRIPTION:

Orange HS Golf Rear Brake Caliper LH
Suits Westfield aluminium golf spec rear upright. ***These do not fit Westfield Sierra Aluminium uprights***
1 Pair of calipers weighs in at less than 3KG
Please note that pads are not included with calipers and will need to be purchased seperately

WESTFIELD PART NO: 2342122

DESCRIPTION:

Orange HS Golf Rear Brake Caliper RH
Suits Westfield aluminium golf spec rear upright. ***These do not fit Westfield Sierra Aluminium uprights***
1 Pair of calipers weighs in at less than 3KG
Please note that pads are not included with calipers and will need to be purchased seperately

WESTFIELD PART NO: 2342121

DESCRIPTION:

Yellow HS Golf Rear Brake Caliper LH
Suits Westfield aluminium golf spec rear upright. ***These do not fit Westfield Sierra Aluminium uprights***
1 Pair of calipers weighs in at less than 3KG
Please note that pads are not included with calipers and will need to be purchased seperately