Westfield parts and upgrades

WESTFIELD PART NO: 4633025

DESCRIPTION:

Full FIA specification roll cage. To suit wide bodied Westfields.
Includes all fittings, nuts, bolts and washers. 2-3 weeks lead time.

FW roll bar covers are not included and will need to be purchased separately. The part number for these is 1290020

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

Material used:PTG700/T45 vs CDS Material Specifications:T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS. 

WESTFIELD PART NO: 4633039

DESCRIPTION:

Full FIA specification roll cage. To suit standard/narrow bodied Westfields.

Please be aware welding is required for installation of the side bars. Side bars may also require cutting down to suit your chassis. Early narrow chassis varied in design, bars are provided longer to allow for variables.
Includes all fittings, nuts, bolts and washers.

PTG700/T45 vs CDS Material Specifications:
T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.
The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS.

WESTFIELD PART NO: 4633038

DESCRIPTION:

Full FIA specification roll cage. To suit standard/narrow bodied Westfields.

Please be aware welding is required for installation of the side bars. Side bars may also require cutting down to suit your chassis. Early narrow chassis varied in design, bars are provided longer to allow for variables.
Includes all fittings, nuts, bolts and washers.

PTG700/T45 vs CDS Material Specifications:
T45 (High Tensile Carbon Manganese Steel) & PTG700 has a tensile strength between 700M/mm2-900N/mm2, whereas CDS (Cold Drawn Seamless Carbon Steel) has tensile strength of approximately 480N/mm2.
The minimum yield strength (when metal starts to deform) of T45 & PTG700 (620N/mm2) is almost double that of CDS.

WESTFIELD PART NO: 55522XX

DESCRIPTION:

ZK Classic Hood and Frame kit.
Kit includes Hood, Frame, mounting brackets and fixings.
Please note that this setup will only suit cars with standard roll bar and standard screen.
WILL NOT SUIT HALF CAGES OR TALL WINDSCREENS.

WESTFIELD PART NO: 55402XX

DESCRIPTION:

Sidescreens including fitting kit, suits standard screen for ZK or FW set up with standard roll bar or half cage.
These will not fit standard/narrow body cars.

WESTFIELD PART NO: 5552285

DESCRIPTION:

New half hood design for the Westfield MSA roll bar with the taller windscreen option.
Suitable for ZK or FW fitment
Fixings included - to be installed by customers

WESTFIELD PART NO: 6147004

DESCRIPTION:

Custom Made Indoor Car Cover
Tailor made to suit the individual spec of your car.
Available for the following specs...

FW and ZK Body styles
Rollbar or Roll cage
Windscreen or Aeroscreen
Spare wheel or no spare wheel

Cover comes with White Westfield Logo Embroidered to front of cover.

WESTFIELD PART NO: 5552284

DESCRIPTION:

Westfield half hood for full roll cage -  Wide body Westfields (Wide body standard on all kits and cars manufactured since 2000)
Complete kit with all mountings, straps and fittings to mount the part to your car.
Will only work correctly with a Westfield FIA approved roll cage
The part is held on to the roll cage with velcro, so can be used with windscreens or aeroscreens
Fixings included - to be installed by customers.

WESTFIELD PART NO: 4633040

DESCRIPTION:

Half cage roll bar for standard/narrow body cars, with double central cross brace and 2 rear stays.

Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.
Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.
PLEASE NOTE THAT CAGE IS COLLECTION ONLY

WESTFIELD PART NO: 4633037

DESCRIPTION:

Half cage roll bar for widebody cars, with double central cross brace and 2 rear stays.
Suitable for classic and FW body styles.
Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.

Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.

Height, 485mm from roll bar mounting plates on your chassis.

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

WESTFIELD PART NO: 6147006

DESCRIPTION:

Westfield Semi Fit Soft Indoor Car Cover
This super soft, super stretchy indoor car covers are the ideal solution for those looking for a fitted car cover without the expense of our fully bespoke car covers  The lycra blended satin fabric allows the cover to cling to the
car whilst the subtle sheen of the fabric provides an elegant finish.   The fabric is tightly woven ensuring a car cover that gives excellent protection from dust and other pollutants at the same time as remaining fully breathable to prevent any build- up of condensation. The snug fit of these car covers ensures that the covers look
great on the cars alongside providing great protection. The low-profile seams
guarantee a sleek finish whilst showing the contours of your car. They are
available in Black complete with Westfield Logo. Will fit all Westfield models Suitable for narrow bodied, prelit, kit bodywork, ZK and FW models with Jap spec loop, RAC, MSA and FIA Roll Cage.   

WESTFIELD PART NO: 4611138

DESCRIPTION:

4 Point Ultralite FIA Harness

Smooth running aluminium adjusters all around
Snap hook fixings all around
Option for the shoulder straps to wrap around roll cage if required
Securing tab for intercom cables on the shoulder strap
Thumb loops on lower shoulder straps
FHR Compatible

WESTFIELD PART NO: 4611135

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611136

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611134

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611133

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611132

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611131

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4620005

DESCRIPTION:

Wing mirrors to fit aeroscreen setup

Priced and sold in pairs, not available individually.

All aeroscreen parts are for wide body vehicles only.

kit includes:

1x off side mirror housing

1x nearside mirror housing

1x set of fitting nuts